Woven Wire Mesh made of selected plain steel wire offers precise construction, uniform opening, excellent corrosion and rust resistance.
Wire Diameter: 0.015-1.8mm
Weaving Pattern: Square (plain weave, twill weave), Dutch (plain dutch weave, twill-dutch weave, double warp Dutch weave, reverse plain dutch weave, reverse twill dutch weave)
Property: with anti-acid, anti-alkali, anti-high temperature, wear-resistant properties.
Mesh count:
Plain weave can be woven up to 400 mesh.
Twill weave can be woven from 400 to 635mesh.
Dutch weave can be woven up to 3200mesh.
Woven Wire Mesh made of selected plain steel wire offers precise construction, uniform opening, excellent corrosion and rust resistance.
Wire Diameter: 0.015-1.8mm
Weaving Pattern: Square (plain weave, twill weave), Dutch ( plain dutch weave, twill-dutch weave, double warp Dutch weave, reverse plain dutch weave ,reverse twill dutch weave )
Property: with anti-acid, anti-alkali, anti-high temperature, wear-resistant properties.
Mesh count:
Plain weave can be woven up to 400 mesh.
Twill weave can be woven from 400 to 635mesh.
Dutch weave can be woven up to 3200mesh.
Features:
• Corrosion resistance.
• Anti-acid and alkali
• Anti-high temperature.
• Good filter performance.
• Long using life
Stainless woven mesh terminology:
Mesh – The number of openings per lineal inch.
SWG – Standard wire gauge
Aperture- The distance between two adjacent wires
Diameter- The thickness of the wire before weaving
Pitch- The distance between the middle point of two adjacent wires or the sum of the aperture width and the wire diameter.
% Open Area- The ratio of the area of the aperture to the area of the mesh expressed in percentage terms
Weft- All wires running across the cloth as woven
Stainless woven mesh formulas:
Aperture
Calculating the aperture
1. Count of a convenient number of apertures (N)
2. Measure the length covered by the N apertures (L)
3. Measure the wire diameter (D)
4. The average aperture (A)
Working example of calculating the aperture of 6/20 woven wire mesh
1. Number of apertures counted N = 6
2. Length covered by apertures center to center L = 25.4mm
3. Diameter of wire D = 0.9mm
4. Aperture
The woven wire is identified as 3.33mm aperture / 0.9mm diameter
Mesh Count
Percentage Open Area
The mesh has a 62% open area
Micron Conversion
Micron (micrometer) is a unit of measure, in which usually only fine mesh under 1mm is referred to. A micron us a thousandth of a millimeter.
In this example 325/48.5, 0.043mm aperture, 0.035mm diameter is used.
